HDCP Encryption/Decryption Code

Rob Johnson (rob@cs.sunysb.edu)
Mikhail Rubnich (rubnich@gmail.com)

This is a free software implementation of the HDCP encryption algorithm. We are releasing this code in hopes that it might be useful to other people researching or implementing the HDCP protocol.

DOWNLOAD: hdcp-0.5.txz, hdcp-0.5.tar.bz2, hdcp-0.5.tgz
TEST: ./hdcp -t
(If there is any "!" in the output, then there was an error)
BENCHMARK: ./hdcp -S

The HDCP cipher is designed to be efficient when implemented in hardware, but it is terribly inefficient in software, primarily because it makes extensive use of bit operations. Our implementation uses bit-slicing to achieve high speeds by exploiting bit-level parallelism. We have created a few high-level routines to make it as easy as possible to implement HDCP, as shown in the following example.

Given Km, REPEATER, and An from the initial HDCP handshake messages, all a decryptor needs to do is:

#define NFRAMES (64) /* NFRAMES must be <= 64 */

void HDCP(uint64_t Km, uint64_t REPEATER, uint64_t An, int width, int height)
  uint64_t Ks, R0, M0, Mi[NFRAMES], Ki[NFRAMES], Ri[NFRAMES], outputs[height][width][NFRAMES];
  BS_HDCPCipherState hs;

  /* Generate the session key Ks, the checksum R0, and the initial IV M0 */
  HDCPAuthentication(Km, REPEATER, An, &Ks, &R0, &M0);

  /* Finish HDCP handshake using R0 */
  /* ... */

  Mi[NFRAMES-1] = M0;  
  while(/* there's more video to encrypt/decrypt... */) {

    /* Generate the Ki, Ri, Mi, and stream cipher outputs for the next NFRAMES frames */
    HDCPInitializeMultiFrameState(NFRAMES, Ks, REPEATER, Mi[NFRAMES-1], &hs, Ki, Ri, Mi);
    HDCPFrameStream(NFRAMES, height, width, &hs, outputs);

    /* xor the next NFRAME frames of video data with outputs... */
    /* ... */

Since our implementation is bit-sliced, it can generate the output for up to 64 frames of video in parallel. This is much faster than a non-bit-sliced implementation that generates 1 frame of stream cipher output at a time, but has the disadvantage of requiring a lot of ram to save the outputs for future frames.

The core cipher code is in hdcp_cipher.[ch]. The example program hdcp.c has two functions of interest:

Some benchmarks on 640x480 frames (using only a single core):
CPU frames/sec
Intel(R) Xeon(R) CPU 5140 @ 2.33GHz 181
Intel(R) Core(TM)2 Duo CPU P9600 @ 2.53GHz 76
Decryption of 1080p content is about 7x slower but decryption can be parallelized across multiple cores, so a high-end 64-bit CPU should be able to decrypt 30fps 1080p content using two cores and about 1.6GB of RAM.

Change Log

Use PRx64 and __restrict to eliminate some warnings.
Extracted autogenerated bitslicing functions into their own file and (hopefully) fixed compilation problem regarding immediate arguments to psllqi128.
Patches from James Nobis: